Outdoor tiles | Pavers with low thickness
Anti-slip and very resistant outdoor tiles
To manufacture our outdoor tiles, we use natural materials, thus obtaining original and very resistant pieces. We mix cement, quartz, silica, stone, and water to produce a completely original product.
PAVERS
Concrete pavers for outdoors
We manufacture our outdoor tiles in 10×20 centimetres with a thickness of 18 millimetres.
We manufactured our tiles with cement and a mixture of various stones. Stones up to 2 mm thick give our tiles a high resistance.
We offer various colours made out of a single-layer concrete mass coloured with natural oxide pigments.
Pavers made of a mixture of quartz, silica, and cement manufactured in low thickness.
GENUINE MATERIAL
Outdoor flooring
We use a special composition of several stones; thus, they are anti-slip and very resistant tiles. It is the ideal choice for outdoor paving.
We manufacture them with two different edge finishes: straight-edge tiles or bevelled-edge tiles.
You can lay them with or without a joint and in various ways: herringbone, parallel, crossed, or interlocked.
Our tiles are an original alternative for an outdoor floor.
Outdoor paving: what should we take into account?
Outdoor flooring, especially in high-traffic areas, must meet certain requirements to guarantee its durability and aesthetics. There are several types of outdoor flooring; these are some of the advantages and disadvantages of some of the most commonly used:
- Porcelain tiles: They are very resistant, usually 2 centimetres thick, and easy to lay, but over time they wear out and lose their initial appearance.
- Stone: They have a natural look, and wear and tear does not affect their appearance. The only drawback is that, over time, they become polished and are no longer slip-resistant.
- Wood: They provide warmth and are non-slip. They are complicated to lay, and the main disadvantage is that they require maintenance.
- Concrete: These are pavers with a high thickness, 5 centimetres or more; thus, they are difficult to transport and lay. Paving stones are placed on sand, and their texture is usually too porous. The pallets are 5 square metres in size. Over time, the sand base deforms and ends up deforming the surface.
Outdoor tiles made out of concrete, but we have improved their characteristics to offer a more versatile concrete paver:
- We press it in low thickness, with only 18 millimetres. Hence, it greatly facilitates its placement and transport with pallets of up to 40 square metres.
- On a uniform subfloor, place the tiles. Thus, it is withstanding high loads and being suitable for high-traffic areas without deformation of the surface.
- We use silica sand as a natural anti-slip material to obtain finer textures without losing its anti-slip properties.
- Their natural wear and tear enhances their appearance.
- It is possible to make outdoor tiles with decorations.
RAW OUTDOOR TILES
This product is an ideal option for both indoor and outdoor flooring
The most authentic state of concrete can be a decorative choice. Due to the nature of our materials and the appearance of random tones, our pieces have a special character.
For interiors, it is important to use a grout similar to the colour of the tiles. The material used in both the grout and tiles is cement, which causes the grout to slightly adhere to our pieces.
Outdoors it is possible to place without grout. It’s also possible to use a mixture of dry sand and cement.
Terrace floor
Cement tiles with a single layer, cobblestone type, low thickness, but high resistance. As a result, they are an ideal alternative for installation in high-traffic areas.
Their composition, consisting of silica and quartz, thus makes them naturally anti-slip pieces of type C3.
Concrete is very porous, thus showing the character of cement in its most original form.
Silica has properties of hardness and texture that make it unique. As a result, silica, together with cement, creates a surface that is different from other materials.
Garden flooring
We manufacture non-slip and resistant cement tiles. Therefore, you can install floor tiles in areas with high humidity.
It’s important to remember that water creates natural shades and, as a result, an effect of random textures.
Our outdoor tiles lay on a homogeneous subfloor, withstand high loads, and are ideal for high-traffic areas. Thus, they are an original design option for many decorative applications.
Treatment
It is also advisable to apply a product that protects the tiles. For the protection of porous surfaces, there are several products on the market. We recommend MP90 Eco Xtreme by Fila; using a roller is an easy way to apply it without altering the cement’s natural look.
To learn more, check out our page on the appearance of our floor tiles or this innovative floor covering concept.